6,009 found, showing page 39 of 151
$9.29
DIB MARGIN GROUT FLOAT
Used to force grout between tile joints. High-quality tempered steel with ergo handle.
View Details
$10.99
9x4 GREEN FOAM FLOAT
Excellent for sandy surfaces. Used to force grout between tile joints. High-quality tempered steel with plastic handle.
View Details
$11.49
12x4 GREEN FOAM FLOAT
Excellent for sandy surfaces. Used to force grout between tile joints. High-quality tempered steel with plastic handle.
View Details
$24.99
6.6" CMPCT CABLE CUTTER
6.6" CMPCT CABLE CUTTER
View Details
$92.99
TGHSYSTM 2.0 LG TOOLBOX
TGHSYSTM 2.0 LG TOOLBOX
View Details
$79.99
*12" CARB BLADE
Thin kerf design provides quick, smooth cuts in all woods with less load on the saw. Ideal for all cutting applications in softwood, hardwood, chip board, or plywood. Professional quality thin kerf carbide saw blades produce a smooth finish with minimal material waste. Computer balanced plate reduces vibration for improved accuracy.
View Details
$11.99
6-1/2" PLYWOOD BLADE
Economy blade for general-purpose use.
View Details
$12.29
3/8" XL SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$10.99
1/2" COREBOX BIT
Cuts rounded grooves used in a variety of applications ranging from doors to columns. Carbide tipped. 1/4" shank.
View Details
$15.99
10-20/12-22 WIRE STRIPPER/CUTTER
10-20/12-22 WIRE STRIPPER/CUTTER
View Details
$6.19
4x5/8 3GR FLAP DISC
Premium abrasive used for material removal. Type 29 zirconium oxide. Provides optimum grinding angle allowing for full use of disc. Removes material 3 times faster than fiber resin disc and lasts 15 times longer.
View Details
$8.39
320G 1/3 SANDING SHEET DIABLO
320GR 1/3 SANDING SHEET
View Details
$12.99
3/8" COMBINATION WRENCH
3/8" COMBINATION WRENCH
View Details
$35.99
LEAD FREE SOLDER KIT
Contains 1/4 lb. silver bearing, solid core, lead-free solder with 96\% tin, 4\% silver composition and 430 F (degrees Fahrenheit melting range. Works as easily as 50 tin/50 lead solder with exactly the same soldering technique. 1.7 oz. No. 95 lead-free tinning flux is formulated to clean, flux, and pre-tin all metals except aluminum. Includes applicator brush and sand cloth.
View Details
$2.39
12TPI SCROLLING BLADE 2pc
All blades are 2-3/4" to 3" long and are packed 2 per card. They fit the most popular brands.
View Details
$14.49
14" CUTOFF BLADE STAINLESS
High Performance cut-off wheel specially formulated for fast burr free cutting. Special double reinforced fiberglass provides increased durability and long life in most applications.
View Details
$69.99
2-9/16 SDSPLUS DRILL BIT
2-9/16 SDSPLUS DRILL BIT
View Details
$3.59
4-1/2X.045X7/8 MASONRY
Type 1, fiberglass reinforced. Fits angle grinders.
View Details
$19.49
6" 8TPI WRECKER BLADE
Heavy-duty multi-material demolition blade designed to reduce bending and breaking. Bi-metal blade is wider (1") and thicker (.062" than standard blades yet fits all reciprocating saws. Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing. Ideal for plumbing, remodeling, rescue, and demolition work. Cuts wood, nail embedded wood, plaster, metal pipe, channels, tubing, angle iron up to 4", steel, and aluminum.
View Details
$2.99
4" 60G CUTOFF WHEEL
High Performance cut-off wheel specially formulated for fast burr free cutting. Special double reinforced fiberglass provides increased durability and long life in most applications.
View Details
$22.99
9" 8TPI WRECKER BLADE***********
Heavy-duty multi-material demolition blade designed to reduce bending and breaking. Bi-metal blade is wider (1") and thicker (.062" than standard blades yet fits all reciprocating saws. Complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking and bouncing. Ideal for plumbing, remodeling, rescue, and demolition work. Cuts wood, nail embedded wood, plaster, metal pipe, channels, tubing, angle iron up to 4", steel, and aluminum.
View Details
$16.99
3/8" RABBETING BIT
Equipped with pilot for making rabbeting cuts without use of a router guide. Carbide tipped. 1/4" shank.
View Details
$5.99
*#1 PHILLIPS SCREWDRIVER
Ergonomically designed handle with slip-resistant textured grip for comfortable hold. Heat-treated alloy steel bars hold up to repeated use. Nickel-plated bar resists corrosion.
View Details
$4.79
#2 PHILLIPS SCREWDRIVER
Ergonomically designed handle with slip-resistant textured grip for comfortable hold. Heat-treated alloy steel bars hold up to repeated use. Nickel-plated bar resists corrosion.
View Details
$4.79
*12TPI SABRE SAW BLADE
All blades are 2-3/4" to 3" long and are packed 2 per card. They fit the most popular brands. Top side panel, wood, fine cutting 12T, for cutting formica, plastic, topped material.
View Details
$3.19
3"x7/8x3/8 POCKET STONE
Sharpen pocket knives and small tool blades. Aluminum oxide. 3" x 7/8" x 3/8".
View Details
$12.99
1/2x16 IRWIN XL SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$13.29
5/8" XL SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$22.99
LONG CUT AVIATION SNIP
Drop-forged chrome vanadium steel blades. Compound action results in maximum power at the jaws with minimum effort at the handles. Serrated blades grip metal to make cutting easier. Fully guaranteed. Snips will cut 18-gauge cold-rolled sheet steel and meet or exceed federal government specifications and ANSI standards. Cushion-grip comfort handles.
View Details
$15.49
3/4x16 IRWIN XL SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$16.49
7/8x16 IRWIN XL SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$289.99
TORCH KIT
Victor compatible light to medium-duty oxy-acetylene kit welds up to 3/8 In. and cuts up to 6 In. Includes check valves for additional safety. Ideal for maintenance, automotive, fabrication, plumbing, DIY. T-grade hose (3/16 In. by 20 Ft.) provides flexibility in fuel gas choice without needing a new hose. Includes: oxygen regulator, acetylene regulator, torch handle, cutting attachment, flint lighter, T-grade hose, cutting tip #0, welding tip #0, check valves, goggles.
View Details
$16.99
1x16 IRWIN XL SPADE BIT
Blue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10\% larger shank for added durability.
View Details
$11.99
7/16x6 DRILL BIT MASONRY
Milwaukee 3-Flat Secure-Grip Hammer-Drill Bits drill faster and last longer than others on the market. The 3-Flat Secure-Grip shank fits in all 1/2 In. three-jaw hammer-drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design.
View Details
$9.99
1# 3/32 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$9.99
1/8 1LB 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$55.99
4x16 CEMENT TROWEL*************
Highest grade spring steel blade is cross-ground to better hold its proper shape. Aluminum alloy Xtralite mounting is lightweight but very strong. Beveled work edges prevent surface aggregate popping.
View Details
